How to do Floor Refinishing?
This info-graphic titled ‘How to do Floor Refinishing? Poshfloors provides us steps to re-finish the floors. Routine maintenance is key to preserving hardwood floors.
Published October 2026
This blog titled ‘How to do Floor Refinishing? Poshfloors provides us steps to re-finish the floors. Routine maintenance is key to preserving hardwood floors.
If the abrasions don’t go all the way through to the wood, you can scuff-sand your wood floors with a buffer and apply a fresh coating or two of finish. This refinishing process is much easier and less expensive than sanding down to bare wood and takes much lesser time. In a couple of hours, your floors look as good as new. The buffer can be rented at a home center, and a void to suck up dust. Buffing hardwood floors can be tricky task, so if you’ve never put-upon a buffer before, practice in the middle of the room until you get a feel for how to play it.
Once the finish is rugged up, we apply a water-based polyurethane, which can be re-applied after 3 hours. Oil-based polys are inexpensive, but each coat takes about 8-9 hours to dry. With any of these finish, we recommend a fresh coat every two years or whenever the floor expresses worn. Stick to that regularly and your floors will never wear out.
There Are Two Levels of Refinishing Hardwood Floors.
1. Buffing
Buffing is the easiest. If scratches and wear are only on the surface finish and the wood underneath is in good shape, you can restore the topcoat by buffing, a process also called screening. You’ll need to rent a floor buffing tool with a series of screen grits to restore the luster to your floor’s topcoat. A buffing tool is much less aggressive than a drum sander and easier to use. Sweep and vacuum up any dust between each grit.
2. Sanding and Refinishing
The other is Sanding and refinishing hardwood floors. This gives you the chance to completely restore old, damaged flooring. It also gives you the chance to change the color of your hardwood flooring with stain. Rent a drum sander and a progression of grits. Remove baseboards. While sanding, keep the sander moving to prevent gouging the flooring. You won’t be able to get too close to your walls, so remove the remaining finish along the edges with a hand-held orbital sander. After you’ve sanded down to bare wood, fill any cracks with color-matched wood filler. Apply the stain and allow to dry thoroughly before applying two to three coats of finish.
Sources
This infographic is created by Poshfloors Ltd. Poshfloors limited has expertise in cleaning marble floors, terrazzo, trevertine, granite tiles.
There's plenty more to explore.
Browse all our latest articles and insights.